Packaging Designer
What are you designing?
- Pallet DesignerStringer and block pallets with deck layout, notches, fasteners, lumber grade and estimated load capacity.
- Box DesignerShipping boxes, mailers and gaylords by FEFCO style, with the dieline, board grade and estimated compression strength.
- Crate DesignerSheathed and slatted export crates on skids, with cleats, ISPM-15 treatment and skid capacity.
- Plastic Pallet DesignerNestable, stackable and rackable molded pallets with the loads they must carry.
- Drum ConfiguratorSteel and plastic drums from 5 to 55 gallons, open or tight head, with UN marking.
- IBC Configurator275 and 330 gallon caged totes with the base, valve and fill opening.
- Bulk Bag DesignerFIBC bags by construction, spouts, loops and safe working load, checked against your product's density.
- Crate ConfiguratorStacking, nesting, collapsible and attached-lid totes.
- Spool DesignerCable and wire reels with flange, barrel and traverse, and the cable length they hold.
Built like the professional tools
- Interactive 3D
- Orbit, explode and isolate every board, panel and fitting. Click a part to edit it.
- Dimensioned drawings
- Top, side, end and bottom views, and the flat dieline for corrugated boxes.
- Engineering estimates
- Pallet load capacity by support case, box compression strength, crate skid capacity and more.
- An official request for quote
- Add your quantity, delivery location and schedule, and suppliers near you quote against the spec sheet, drawings and mockup. Every revision is kept.